home *** CD-ROM | disk | FTP | other *** search
- Path: castle.nando.net!news
- From: Joseph Watson <joewat@nando.net>
- Newsgroups: comp.dcom.modems
- Subject: Re: Setting No. of rings on FaxWorks Voice for Windows ver 3.00g
- Date: Thu, 07 Mar 1996 22:58:38 -0600
- Organization: Nando.net Public Access
- Message-ID: <313FBE7E.6A5B@nando.net>
- References: <4hm2rg$bpc@dfw-ixnews4.ix.netcom.com>
- NNTP-Posting-Host: grail517.nando.net
- Mime-Version: 1.0
- Content-Type: text/plain; charset=us-ascii
- Content-Transfer-Encoding: 7bit
- X-Mailer: Mozilla 2.0 (Win95; I)
-
- Thomas A. Espinoza wrote:
- >
- > The software referred to above was included in a Cardinal 28.8 V.34
- > Internal Fax Modem for PC's that I recently purchased. After an
- > excruciating installation almost everything seems to be working right
- > with one exception.
- > Unfortunately I have one problem. I cannot seem to make the settings
- > for the no of rings in either the voice or the fax setup stay. I would
- > like to have the fax pick up in two rings and voice pick up in four
- > rings. I am using automatic reception and I have not enabled toll
- > saver. After I make my selections for the number of rings and close the
- > respective dialog boxes I find that the no of rings setting was not
- > where I set them. Any fixes? Is this the right place to even ask the
- > question?
- > Thanks
- > Tom-Espi@ix.netcom.com
-
- For the discrimination function of a voice modem to work it has to
- answer the call before determining whether it is a fax or voice message;
- the number of rings to answer will have to be the same in both setups,
- otherwise the discriminator is void and which ever is set to answer
- first will try to receive or disconnect
-